GUI for studying the parameters influence of the electric arc model for a three-phase electric arc furnace

International Conference on Applied Sciences 2016

Ghiormez, L.^1 ; Prostean, O.^1 ; Panoiu, M.^2 ; Panoiu, C.^2

Politehnica University of Timisoara, Department of Automation and Applied Informatics, Vasile Parvan Street, no. 2, Timisoara

300223, Romania^1

Politehnica University of Timisoara, Department of Electrical Engineering and Industrial Informatics, Revolution Street, no. 5, Hunedoara

331128, Romania^2

关键词: Block diagrams;    Electric arc furnace;    Electric arc model;    MATLAB program;    Model parameters;    Nonlinear load;    Three phase;    Voltage-current characteristics;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/163/1/012026/pdf
DOI  :  10.1088/1757-899X/163/1/012026

来源: IOP

【 摘 要 】

This paper presents an analysis regarding the modeling of the behavior for a three-phase electric arc furnace installation. Therefore, a block diagram is implemented in Simulink that represents the modeling of the entire electric arc furnace installation. This block diagram contains also the modeling of the electric arc which is the element that makes the electric arc furnace behaving as a nonlinear load. The values for the model parameters of the electric arc furnace installation are like the ones from the real installation taken into consideration. Other model parameters are the electric arc model ones. In order to study the influence of the parameters of the electric arc models, it is developed a Matlab program that contains the graphical user interfaces. These interfaces make connection with the models of the electric arc implemented in Simulink. The interfaces allow the user to modify parameters for each of the electric arc model. Current and voltage of the electric arc are the variables taken into account to study the influence of the parameters on the electric arc models. Waveforms for voltage and current of the electric arc are illustrated when a parameter of the model is modified in order to analyze the importance of this parameter on the electric arc model. Also, for each of the models is presented the voltage-current characteristic of the electric arc because this characteristic gives information about the behavior of the electric arc furnace installation.