Bucket wheel rehabilitation of ERC 1400-30/7 high-capacity excavators from lignite quarries

20th Innovative Manufacturing Engineering and Energy Conference

机械制造;能源学

Vilceanu, Fl^1 ; Iancu, C.^2

University of Petroani, Romania^1

Department IMST, University Constantin Brancui of Targu-Jiu, Romania^2

关键词: Classical model;    Constructive solutions;    Distribution maps;    Effective resistances;    Excavation process;    Mechanical stress;    Metal structures;    Operational safety;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/161/1/012081/pdf
DOI  :  10.1088/1757-899X/161/1/012081

来源: IOP

【 摘 要 】

The existence of bucket wheel equipment type ERC 1400-30/7 in lignite quarries with lifetime expired, or in the ultimate life period, together with high cost investments for their replacement, makes rational the efforts made to rehabilitation in order to extend their life. Rehabilitation involves checking operational safety based on relevant expertise of metal structures supporting effective resistance but also the replacement (or modernization) of subassemblies that can increase excavation process productivity, lowering energy consumption, reducing mechanical stresses. This paper proposes an analysis of constructive solution of using a part of the classical bucket wheel, on which are located 9 cutting cups and 9 chargers cups and adding a new part so that the new redesigned bucket-wheel will contain 18 cutting-chargers cups, compared to the classical model. On the CAD model of bucket wheel was performed a static and a dynamic FEA, the results being compared with the yield strength of the material of the entire structure, were checked mechanical stresses in the overall distribution map, and were verified the first 4 vibrating modes the structure compared to real loads. Thus was verified that the redesigned bucket-wheel can accomplish the proposed goals respectively increase excavation process productivity, lowering energy consumption and reducing mechanical stresses.