Silent Flange Coupling Design Used for the Schenck Eddy Current Dynamometer

20th Innovative Manufacturing Engineering and Energy Conference

机械制造;能源学

Schinteie, D.^1 ; Croitorescu, V.^1

Scientific Research and Continuous Training Center for Sustainable Automotive Technologies, University POLITEHNICA of Bucharest, Faculty of Transport, 313 Splaiul Independentei St., Bucharest, Romania^1

关键词: Appropriate designs;    Coupling designs;    Eddy current dynamometer;    Equivalent stress;    Modular components;    Operation procedure;    Positioning accuracy;    Small deformations;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/161/1/012001/pdf
DOI  :  10.1088/1757-899X/161/1/012001

来源: IOP

【 摘 要 】

The silent flange used for coupling different machines/systems to an eddy current dynamometer represents one of the modular components each test-bench should use. By introducing a silent flange into a dynamometer, the coupling steps are easier and faster. For an appropriate design, the silent flange was analyzed using dedicated software during different operation procedures and scenarios, for materials that allow easy manufacturing. This study shows that the design for this silent flange model has no danger of failure due to the small deformation and the values for the equivalent stresses. The silent flange coupling is suitable for the dynamometer for his high positioning accuracy, the zero backlash and the fact that there is no motion between the shafts.