"Hydraulic Cushion" Type Overload Protection Devices Usable in Mechanical Presses. A Patent Study

20th Innovative Manufacturing Engineering and Energy Conference

机械制造;能源学

Cioar, R.^1

Department of Engineering and Industrial Management, Transilvania University, Brasov

500036, Romania^1

关键词: Crank mechanism;    Mechanical press;    Overload protection;    Protection device;    Protection systems;    Relative motion;    Working areas;    Workpiece;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/161/1/012006/pdf
DOI  :  10.1088/1757-899X/161/1/012006

来源: IOP

【 摘 要 】

The possible consequences of machine-tool overload are well-known. In order to prevent such, machine-tools are equipped with various overload protection devices. Mechanical presses, intensively strained machine-tools, are typically equipped with three protection systems: against accidental access to the working area during machine deployment, against torque overload and force overload. Force overload protection systems include either destructible parts and are used in small to medium nominal force mechanical presses, or non-destructible ones used mostly in medium to large nominal force (H-frame) presses. A particular class of force overload protection systems without destructible parts are "hydraulic cushion" type devices. While such systems do not necessarily cause the machine to stop, the slide's stroke does not reach the initial dead centre and consequently cannot exert the designed technological force on the workpiece. By a patent study referencing 19 relevant patents the paper captures both the diversity of the constrictive solutions of "hydraulic cushion" type protection devices and their positioning modalities within the structure of a mechanical press. An important aim of the study is to highlight the reserve of creativity existing in this field, at least from the viewpoint of the hydraulic cushion positioning, as well as to emphasize the essential requirement of a relative motion between the mobile and the fixed parts of the tool, a motion of opposite sense to that of the slide-crank mechanism.