CFD Simulation of Aerial Crop Spraying

International Engineering Research and Innovation Symposium

Omar, Zamri^1 ; Qiang, Kua Yong^1 ; Mohd, Sofian^1 ; Rosly, Nurhayati^1

Aeronautical Engineering Department, Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, Malaysia^1

关键词: Aerial application;    Agricultural aircraft;    CFD simulations;    Discrete phase model;    Nozzle orientations;    Spray characteristics;    Spray simulation;    Spraying system;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/160/1/012028/pdf
DOI  :  10.1088/1757-899X/160/1/012028

来源: IOP

【 摘 要 】

Aerial crop spraying, also known as crop dusting, is made for aerial application of pesticides or fertilizer. An agricultural aircraft which is converted from an aircraft has been built to combine with the aerial crop spraying for the purpose. In recent years, many studies on the aerial crop spraying were conducted because aerial application is the most economical, large and rapid treatment for the crops. The main objective of this research is to study the airflow of aerial crop spraying system using Computational Fluid Dynamics. This paper is focus on the effect of aircraft speed and nozzle orientation on the distribution of spray droplet at a certain height. Successful and accurate of CFD simulation will improve the quality of spray during the real situation and reduce the spray drift. The spray characteristics and efficiency are determined from the calculated results of CFD. Turbulence Model (k- Model) is used for the airflow in the fluid domain to achieve a more accurate simulation. Furthermore, spray simulation is done by setting the Flat-fan Atomizer Model of Discrete Phase Model (DPM) at the nozzle exit. The interaction of spray from each flat-fan atomizer can also be observed from the simulation. The evaluation of this study is validation and grid dependency study using field data from industry.