Effect of inter-laminar fibre orientation on the tensile properties of sisal fibre reinforced polyester composites

4th AEROTECH- Innovation in Aerospace Engineering and Technology

航空航天工程

Senthilkumar, K.^1 ; Siva, I.^1 ; Jappes, J. T. Winowlin^1 ; Amico, S.C.^2 ; Cardona, F.^3 ; Sultan, M.T.H.^3

Centre for Composite Materials, Department of Mechanical Engineering, Kalasalingam University, Tamilnadu, India^1

DEMAT, Federal University of Rio Grande Do sul (UFRGS), Brazil^2

Aerospace Manufacturing Research Centre (AMRC), Universiti Putra Malaysia, Serdang, Malaysia^3

关键词: Fibre orientation;    Interphase adhesion;    Oriented composites;    Polyester composites;    Properties of composites;    Sisal fibre;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/152/1/012055/pdf
DOI  :  10.1088/1757-899X/152/1/012055

学科分类：航空航天科学

来源: IOP

【 摘 要 】

In this present work, effects of interlamina fibre orientation on the tensile properties of composites were studied and the results were discussed. The varying types of fibre oriented composites were prepared using the compression moulding technique at a pressure of 17 MPa. The different types of oriented composites investigated were 90°/0 ° /90 °, 0 ° /90 ° /0 °, 90 ° /0 ° /0 ° /90 °, 0 ° /45 ° /0 °, 0 ° /90 ° /45 ° /45 ° /90 ° /0 °, 0 ° /45 ° /90 ° /90 ° /45 ° /0 ° and these composites were subjected to tensile testing according to ASTM: D3039-08. The sisal fibres were arranged in various angles with the help of specially designed mould. It was found that the tensile strength of sisal fibre composites improved when 0 ° oriented fibres were positioned at the extreme layers of the composites compared to 90 ° oriented fibres. The highest tensile strength among the types of composites was observed for 0 ° /90 ° /0 °. The scanning electron microscopy (SEM) analysis was performed to understand the interphase adhesion mechanism.