Laser assisted machining: a state of art review

International Conference on Advances in Materials and Manufacturing Applications 2016

Punugupati, Gurabvaiah^1 ; Kandi, Kishore Kumar^1 ; Bose, P.S.C.^1 ; Rao, C.S.P.^1

Mechanical Engineering Department, National Institute of Technology, Warangal

506004, India^1

关键词: Conventional methods;    Corrosion resistivity;    Difficult-to-cut materials;    High temperature and pressure;    High wear resistance;    Innovative techniques;    Laser-assisted machining;    Low thermal conductivity;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/149/1/012014/pdf
DOI  :  10.1088/1757-899X/149/1/012014

来源: IOP

【 摘 要 】

Difficult-to-cut materials have increasing demand in aerospace and automobile industries due to their high yield stress, high strength to weight ratio, high toughness, high wear resistance, high creep, high corrosion resistivity, ability to retain high strength at high temperature, etc. The machinability of these advanced materials, using conventional methods of machining is typical due to the high temperature and pressure at the cutting zone and tool and properties such as low thermal conductivity, high cutting forces and cutting temperatures makes the materials difficult to machine. Laser assisted machining (LAM) is a new and innovative technique for machining the difficult-to-cut materials. This paper deals with a review on the advances in lasers, tools and the mechanism of machining using LAM and their effects.