Manufacturing of aluminium nano hybrid composites: a state of review

International Conference on Advances in Materials and Manufacturing Applications 2016

Madhukar, P.^1 ; Selvaraj, N.^1 ; Rao, C.S.P.^1

Mechanical Engineering Department, National Institute of Technology, Warangal

Telangana

506004, India^1

关键词: Advanced applications;    Fabrication method;    Hybrid composites;    Machining characteristics;    Nano-hybrid composites;    Rice husk;    Tribological behaviour;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/149/1/012114/pdf
DOI  :  10.1088/1757-899X/149/1/012114

来源: IOP

【 摘 要 】

This paper gives the details of hybrid composites, their fabrication methods and evaluation of mechanical, tribological behaviour and machining characteristics. Investigations on the various aspects of Hybrid composites furnish several conclusions regarding the influence of various parameters on the performance of the composites. Mostly micro structures of the hybrid composites fabricated through casting routes have been found to be stable with the distribution of uniformed reinforce particles. Therefore, the hybrid composites can be constructed with various combinations of reinforcements to carry out desirable mechanical properties. The density of Hybrid composites increases with increasing reinforcements such as SiC, TiC, B4C....etc, while incorporation of partial reinforcements like fly ash, mica, rice husk, etc. reduces the density of composites. The study also reports that the hybrid composites can be treated as a replacement for regular composite materials in different advanced applications.