Comparison of spectral analysis of vibration using commercial knock sensor and 3-axis acceleration sensor

Scientific Conference on Automotive Vehicles and Combustion Engines 2016

Zieliski, L.^1 ; Walczak, D.^1 ; Szczurowski, K.^1 ; Radkowski, S.^1

Warsaw University of Technology, Institute of Vehicles, Warsaw, PL, Poland^1

关键词: 3-axis acceleration;    Combustion pro-cess;    Engine performance;    High frequency HF;    Noise and vibration;    Reciprocating engines;    Three-axis acceleration sensor;    Vibration acceleration sensor;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/148/1/012057/pdf
DOI  :  10.1088/1757-899X/148/1/012057

来源: IOP

【 摘 要 】

With the development of internal combustion engines, engineers attempt to reduce the noise and vibration generated. Due to the high cost of fuel, are increasingly looking for new sources of power in order to reduce costs. In diesel engines, an increasingly popular method is the admixture of propane-butane. This follows because of the price of the fuel as well as to improve the efficiency of combustion. With the development of this type of dual fuel power seems to be a reasonable study of the effects of LPG to generate noise and vibration, as well as an attempt to evaluate the combustion process. Unfortunately, too much addition of LPG causes a phenomenon called knock consisting in abnormal, uneven, explosive combustion of fuels in reciprocating engines. This phenomenon may lead to a reduction in engine performance and permanent damage. Control of the knock detection uses vibration acceleration sensors recording the high frequency ranges. Within the framework of the research conducted by the team of authors, an attempt was made to compare the vibroacoustic signals originating from the commercial knocking sensor with a three-axis acceleration sensor. These signals were subject to a quick Fourier transform in the purpose of analysing the amplitude spectra.