The combustion properties analysis of various liquid fuels based on crude oil and renewables

Scientific Conference on Automotive Vehicles and Combustion Engines 2016

Grab-Rogalinski, K.^1 ; Szwaja, S.^1

Czestochowa University of Technology, Institute of Thermal Machinery, Armii Krajowej 21 Av., Czestochowa

42-200, Poland^1

关键词: Combustion parameters;    Constant volume combustion chambers;    Injection durations;    Injection parameters;    Pressure and temperature;    Rate of heat release;    Thermodynamic conditions;    Two stage combustion;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/148/1/012066/pdf
DOI  :  10.1088/1757-899X/148/1/012066

来源: IOP

【 摘 要 】

The paper presents results of investigation on combustion properties analysis of hydrocarbon based liquid fuels commonly used in the CI engine. The analysis was performed with aid of the CRU (Combustion Research Unit). CRU is the machine consisted of a constant volume combustion chamber equipped with one or two fuel injectors and a pressure sensor. Fuel can be injected under various both injection pressure and injection duration, also with two injector versions two stage combustion with pilot injection can be simulated, that makes it possible to introduce and modify additional parameter which is injection delay (defined as the time between pilot and main injection). On a basis of this investigation such combustion parameters as pressure increase, rate of heat release, ignition delay and combustion duration can be determined. The research was performed for the four fuels as follows: LFO, HFO, Biofuel from rape seeds and Glycerol under various injection parameters as well as combustion chamber thermodynamic conditions. Under these tests the change in such injection parameters as injection pressure, use of pilot injection, injection delay and injection duration, for main injection, were made. Moreover, fuels were tested under different conditions of load, what was determined by initial conditions (pressure and temperature) in the combustion chamber. Stored data from research allows to compare combustion parameters for fuels applied to tests and show this comparison in diagrams.