Planning and leading of the technological processes by mechanical working with microsoft project

7th International Conference on Advanced Concepts in Mechanical Engineering

Nae, I.^1 ; Grigore, N.^1

Mechanical Engineering Department, Petroleum-Gas University of Ploiesti, Ploiesti, Romania^1

关键词: Fabrication systems;    Mechanical working;    Processing operations;    Processing technologies;    Schedule and budget;    Technological alternatives;    Technological operations;    Technological process;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/147/1/012045/pdf
DOI  :  10.1088/1757-899X/147/1/012045

来源: IOP

【 摘 要 】

Nowadays, fabrication systems and methods are being modified; new processing technologies come up, flow sheets develop a minimum number of phases, the flexibility of the technologies grows up, new methods and instruments of monitoring and leading the processing operations also come up. The technological course (route, entry, scheme, guiding) referring to the series of the operation, putting and execution phases of a mark in order to obtain the final product from the blank is represented by a sequence of activities realized by a logic manner, on a well determined schedule, with a determined budget and resources. Also, a project can be defined as a series of specific activities, methodical structured which they aim to finish a specific objective, within a fixed schedule and budget. Within the homogeneity between the project and the technological course, this research is presenting the defining of the technological course of mechanical chip removing process using Microsoft Project. Under these circumstances, this research highlights the advantages of this method: the celerity using of other technological alternatives in order to pick the optimal process, the job scheduling being constrained by any kinds, the standardization of some processing technological operations.