Evaluating lubricant performance by 3D profilometry of wear scars

7th International Conference on Advanced Concepts in Mechanical Engineering

Georgescu, C.^1 ; Deleanu, L.^1 ; Pirvu, C.^2

Department of Mechanical Engineering, Dunarea de Jos University, Galati, Romania^1

InCaS, Bucharest, Romania^2

关键词: 3-D parameter;    3-D profilometry;    Four-ball machine;    Lubricant performance;    Rapeseed oil;    Surface textures;    Wear scars;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/147/1/012016/pdf
DOI  :  10.1088/1757-899X/147/1/012016

来源: IOP

【 摘 要 】

Due to improvement in analysing surface texture and optical instruments for investigating the texture surface, the authors propose to evaluate the lubricant performance by analysing the change in several 3D parameters in comparison to an analysis on 2D profile. All the surface of the wear scar generated on the four ball machine is investigated and the conclusion is that from the tribological point of view, the 3D parameters reflect better the surface quality evolution after testing. Investigation was done on the wear scars generated on the three fixed balls, for five lubricants: a non-additivated transmission mineral oil (T90), two grades of rapeseed oil (coarse degummed and refined) and two grades of soybean oil (coarse and degummed).