Modeling of a V-type mining support in an advanced engineering environment

4th ModTech International Conference - Modern Technologies in Industrial Engineering

Gwiazda, A.^1 ; Banas, W.^1 ; Foit, K.^1 ; Topolska, S.^2 ; Monica, Z.^1 ; Skala, A.^1

Silesian University of Technology, Faculty of Mechanical Engineering, Institute of Engineering Processes Automation and Integrated Manufacturing Systems, Konarskiego 18A, Gliwice

44-100, Poland^1

Silesian University of Technology, Faculty of Mechanical Engineering, Institute of Engineering Materials and Biomaterials, Konarskiego 18A, Gliwice

44-100, Poland^2

关键词: Advanced engineering environments;    Construction systems;    Geometrical characteristics;    Hydraulic cylinders;    Integrated design process;    Material characteristics;    Mechanized mining;    Structural concept;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/145/4/042004/pdf
DOI  :  10.1088/1757-899X/145/4/042004

来源: IOP

【 摘 要 】

Designing technical means using advanced computer systems requires the change in approaches to specific tasks carried out in this process. The solution of this problem is an integrative approach, which allows linking different operating ranges, various tools and complicated sets of requirements into a single operating design system. The elements of this integrative approach is the concept of splitting a technical mean system into three sub-system components. The first is structural sub-system containing solutions and their attributes regarding the structural concept of a designed system. The second is drive sub-system containing solutions of drive systems along with the parameters of their operation. Finally the last sub-system contains information relating to the control system and its settings. Systems attributes include such design features as the geometrical characteristics, material characteristics and assembly characteristics. The subject of the integrated design process is a mechanized mining support. As a part of the project the construction system of a mechanized mining support was divided on the three sub-systems. The structural subsystem includes a canopy, a burst shield and foot parts. Whereas the drive sub-system comprises includes the system of hydraulic props and hydraulic cylinders responsible for the functioning of the support. In the example, presented in the paper, is shown the system of hydraulic props where they are arranged in a V-system. These indicated two sub-systems form the structure of the support. It is complemented by the control sub-system basing on the use of control valves and separator valves and an operator control panel.