A study on fluid flow simulation in the cooling systems of machine tools

4th ModTech International Conference - Modern Technologies in Industrial Engineering

Olaru, I.^1

Vasile Alecsandri University of Bacau, Calea Marasesti 157, Romania^1

关键词: Cooling fluids;    Cutting operations;    Fluid flow parameters;    High temperature;    Impact on the environment;    Machined surface;    Operating modes;    Working areas;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/145/2/022016/pdf
DOI  :  10.1088/1757-899X/145/2/022016

来源: IOP

【 摘 要 】

This paper aims analysing the type of coolants and the correct choice of that as well as the dispensation in the processing area to control the temperature resulted from the cutting operation and the choose of the cutting operating modes. A high temperature in the working area over a certain amount can be harmful in terms of the quality of resulting surface and that could have some influences on the life of the cutting tool. The coolant chosen can be a combination of different cooling fluids in order to achieve a better cooling of the cutting area at the same time for carrying out the proper lubrication of that area. The fluid flow parameters of coolant can be influenced by the nature of the fluid or fluids used, the geometry of the nozzle used which generally has a convergent-divergent geometry in order to achieve a better dispersion of the coolant / lubricant on the area to be processed. A smaller amount of fluid is important in terms of the economy lubricant, because they are quite expensive. A minimal amount of lubricant may have a better impact on the environment and the health of the operator because the coolants in contact with overheated machined surface may develop a substantial amount of these gases that are not always beneficial to health.