Global strength assessment in oblique waves of a large gas carrier ship, based on a non-linear iterative method

4th ModTech International Conference - Modern Technologies in Industrial Engineering

Domnisoru, L.^1 ; Modiga, A.^1 ; Gasparotti, C.^1

Department of Naval Architecture, Dunarea de Jos University of Galati, Domneasca Street 111, 800201, Romania^1

关键词: Classification societies;    Equilibrium conditions;    Equilibrium parameters;    Gas carriers;    Longitudinal strength;    Non linear;    Oblique wave;    Structural assessments;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/145/8/082009/pdf
DOI  :  10.1088/1757-899X/145/8/082009

来源: IOP

【 摘 要 】

At the ship's design, the first step of the hull structural assessment is based on the longitudinal strength analysis, with head wave equivalent loads by the ships' classification societies' rules. This paper presents an enhancement of the longitudinal strength analysis, considering the general case of the oblique quasi-static equivalent waves, based on the own non-linear iterative procedure and in-house program. The numerical approach is developed for the mono-hull ships, without restrictions on 3D-hull offset lines non-linearities, and involves three interlinked iterative cycles on floating, pitch and roll trim equilibrium conditions. Besides the ship-wave equilibrium parameters, the ship's girder wave induced loads are obtained. As numerical study case we have considered a large LPG liquefied petroleum gas carrier. The numerical results of the large LPG are compared with the statistical design values from several ships' classification societies' rules. This study makes possible to obtain the oblique wave conditions that are inducing the maximum loads into the large LPG ship's girder. The numerical results of this study are pointing out that the non-linear iterative approach is necessary for the computation of the extreme loads induced by the oblique waves, ensuring better accuracy of the large LPG ship's longitudinal strength assessment.