Realization of station for testing asynchronous three-phase motors

4th ModTech International Conference - Modern Technologies in Industrial Engineering

Wróbel, A.^1 ; Surma, W.^1

Silesian University of Technology, Faculty of Mechanical Engineering, Institute of Engineering Processes Automation and Integrated Manufacturing Systems, Konarskiego 18A, Gliwice

44-100, Poland^1

关键词: Basic parameters;    Drive systems;    Motor parameters;    Physical parameters;    Teaching and researches;    Three phase motor;    Varying load;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/145/5/052004/pdf
DOI  :  10.1088/1757-899X/145/5/052004

来源: IOP

【 摘 要 】

Nowadays, you cannot imagine the construction and operation of machines without the use of electric motors [13-15]. The proposed position is designed to allow testing of asynchronous three-phase motors. The position consists of a tested engine and the engine running as a load, both engines combined with a mechanical clutch [2]. The value of the load is recorded by measuring shaft created with Strain Gauge Bridge. This concept will allow to study the basic parameters of the engines, visualization motor parameters both vector and scalar controlled, during varying load drive system. In addition, registration during the variable physical parameters of the working electric motor, controlled by a frequency converter or controlled by a contactor will be possible. Position is designed as a teaching and research position to characterize the engines. It will be also possible selection of inverter parameters.