Electrochemical Aspects of the ESR Process

International Symposium on Liquid Metal Processing & Casting 2015

材料科学;金属工艺学

Mitchell, Alec^1

Dept. of Materials Engineering, University of British Columbia, Vancouver

BC, Canada^1

关键词: Alloy compositions;    Alumina inclusions;    Cathodic deposition;    Faradaic reactions;    Industrial practices;    Laboratory investigations;    Physical characteristics;    Slag compositions;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/143/1/012001/pdf
DOI  :  10.1088/1757-899X/143/1/012001

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

Current passage in the ESR process is accomplished by at least two Faradaic reaction systems, one at the electrode/slag interface and another at the slag/ingot interface. The nature of these reactions has been investigated and is reported to be a function of the alloy composition, current density and slag composition. In this report, data generated from both DC and line- frequency AC ESR operations is used to relate laboratory investigations on these reactions to results obtained in industrial practice. The operating reaction in the line frequency AC melting of simple alloy steels is found to be principally the reversible anodic oxidation of iron (Fe/Fe2+). In the equivalent DC process there is in addition the cathodic deposition of aluminium, resulting in the formation of substantial amounts of D-type alumina inclusions in the ingot. The Faradaic reactions involve energy exchange which should be taken into account in the process energy balance. They also are likely to change the interface physical characteristics such as interfacial tension. The data is extended to the case of low frequency ESR furnaces in which it is found that the extent of the reactions is strongly dependent on current density. It is concluded that the presence of Faradaic reactions in low frequency furnaces is unlikely to lead to quality problems in the alloys and applications for which these processes are used. This conclusion appears to be supported by industrial practice and leads to a further conclusion that low frequency practices in large ESR furnaces could potentially be replaced by simpler DC systems.