Physical Modeling of Contact Processes on the Cutting Tools Surfaces of STM When Turning

7th International Scientific Practical Conference "Innovative Technologies in Engineering"

Belozerov, V.A.^1 ; Uteshev, M.H.^1

Tyumen State Oil and Gas University, Volodarskogo street, 38, Tyumen

625000, Russia^1

关键词: Contact process;    Dynamic strength;    Fine turning;    Flexible manufacturing;    Optimization modeling;    Physical model;    Steel tools;    Thermo-mechanical;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/142/1/012075/pdf
DOI  :  10.1088/1757-899X/142/1/012075

来源: IOP

【 摘 要 】

This article describes how to create an optimization model of the process of fine turning of superalloys and steel tools from STM on CNC machines, flexible manufacturing units (GPM), machining centers. Creation of the optimization model allows you to link (unite) contact processes simultaneously on the front and back surfaces of the tool from STM to manage contact processes and the dynamic strength of the cutting tool at the top of the STM. Established optimization model of management of the dynamic strength of the incisors of the STM in the process of fine turning is based on a previously developed thermomechanical (physical, heat) model, which allows the system thermomechanical approach to choosing brands STM (domestic and foreign) for cutting tools from STM designed for fine turning of heat resistant alloys and steels.