Quality Estimation of Dry Grinding of Skiving Cutters With Organic Bonding Diamond Wheels

7th International Scientific Practical Conference "Innovative Technologies in Engineering"

Filippov, A.V.^1,2 ; Shamarin, N.N.^2 ; Podgornykh, O.A.^2 ; Rubtsov, V.E.^1,2

Institute of Strenght Physics and Materials Sciencs SB RAS, per. Academicheskii 2/4, Tomsk, Russia^1

Tomsk Polytechnic University, Lenina av. 30, Tomsk, Russia^2

关键词: Cutting tools grinding;    Engineering process;    Laser confocal microscopy;    Lubricating cooling liquids;    Mechanical treatments;    Quality estimation;    Surface machining;    Treatment methods;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/142/1/012099/pdf
DOI  :  10.1088/1757-899X/142/1/012099

来源: IOP

【 摘 要 】

Engineering process preparation requires proper preparation of cutting tools. It influences not only the performance of the tools but also the quality of workpiece surface machining. One of the promising environmentally friendly trends of mechanical treatment is grinding without using lubricating cooling liquid. This method can considerably influence the quality of cutting tools grinding. Smoothing skiving turning is an effective treatment method providing high efficiency and workpiece quality. Proper preparation of cutting edges is especially important in this process. For that purpose we have carried out a research in grinding changeable carbide inserts for skiving turning by means of grinding wheels with different grain size. The influence of different combinations of wheels on roughness of the inserts front and rear surfaces and quality of cutting edge was studied with the help of laser confocal microscopy.