Mathematical Modeling for the Development of Equipment for Thermochemical Processing of Wood Waste in to Dimethyl Ether

7th International Scientific Practical Conference "Innovative Technologies in Engineering"

Sadrtdinov, Almaz R.^1 ; Esmagilova, Liliya M.^1 ; Saldaev, Vladimir A.^1 ; Sattarova, Zulfiya G.^1 ; Mokhovikov, Alexey A.^2

Institute of Petroleum and Chemical Engineering, Kazan National Research Technological University, K. Marx street 68, Republic of Tatarstan, Kazan

420015, Russia^1

Yurga Institute of Technology, National Research Tomsk Polytechnic University, Leningradskaya street 26, Yurga

652055, Russia^2

关键词: Catalytic synthesis;    Constructive parameters;    Differential and algebraic equations;    Initial and boundary conditions;    Operating parameters;    Physical pictures;    Thermochemical processing;    Waste processing;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/142/1/012094/pdf
DOI  :  10.1088/1757-899X/142/1/012094

来源: IOP

【 摘 要 】

The paper describes the process of thermochemical wood waste processing in to dimethyl ether. The physical picture of the process of waste wood recycling was compiled and studied and the mathematical model in the form of differential and algebraic equations with initial and boundary conditions was developed on its basis. The mathematical model allows to determine the optimum operating parameters of synthesis gas producing process, suitable for the catalytic synthesis of dimethyl ether and to calculate the basic constructive parameters of the equipment flowsheet.