Analysis of the Lifecycle of Mechanical Engineering Products

7th International Scientific Practical Conference "Innovative Technologies in Engineering"

Gubaydulina, R.H.^1 ; Gruby, S.V.^2 ; Davlatov, G.D.^1

Yurga Institute of Technology of National Research, Tomsk Polytechnic University Affiliate, Tomsk, Russia^1

Moscow State Technical University by N.E. Bauman, Moscow, Russia^2

关键词: Feedback phase;    Machine construction;    Manufacturing technologies;    PLM systems;    Self-organizing systems;    Whole life cycles;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/142/1/012060/pdf
DOI  :  10.1088/1757-899X/142/1/012060

来源: IOP

【 摘 要 】

Principal phases of the lifecycle of mechanical engineering products are analyzed in the paper. The authors have developed methods and procedures to improve designing, manufacturing, operating and recycling of the machine. It has been revealed that economic lifecycle of the product is a base for appropriate organization of mechanical engineering production. This lifecycle is calculated as a minimal sum total of consumer and producer costs. The machine construction and its manufacturing technology are interrelated through a maximal possible company profit. The products are to be recycled by their producer. Recycling should be considered as a feedback phase, necessary to make the whole lifecycle of the product a constantly functioning self-organizing system. The principles, outlined in this paper can be used as fundamentals to develop an automated PLM-system.