Mechanical Treatment of Raw Waste Lumber an Effective Way to Preserve the Ecology and Resources

7th International Scientific Practical Conference "Innovative Technologies in Engineering"

Fomin, Anatoly A.^1 ; Gusev, Vladimir G.^1 ; Yudin, Roman V.^2 ; Timerbaev, Nail F.^3 ; Retyunskiy, Oleg Yu^4

Institute of Engineering and Automobile Transport, Vladimir State University, Gorky street 87, Vladimir

600000, Russia^1

Voronezh State Academy of Forestry Engineering, Timiryazeva street 8, Voronezh

394087, Russia^2

Institute of Petroleum and Chemical Engineering, Kazan National Research Technological University, K. Marx street 68, Republic of Tatarstan, Kazan

420015, Russia^3

Yurga Institute of Technology, National Research Tomsk Polytechnic University, Leningradskaya street 26, Yurga

652055, Russia^4

关键词: Alternative process;    Geometric errors;    Machine modeling;    Material resources;    Mechanical treatments;    Milling process;    Stock materials;    Treatment process;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/142/1/012091/pdf
DOI  :  10.1088/1757-899X/142/1/012091

来源: IOP

【 摘 要 】

Alternative process flowsheet machining of the machining of raw waste lumber were analysed, and it was implemented in a real machine model based on the chosen scheme. The forming process of the treated surface of the stock material was examined, and consequently the mathematical models of the geometric errors in terms of independent factors of the profile milling process were defined. Based on these models is possible to construct a treatment process of the raw waste lumber with minimal errors on the surfaces which were treated. The manufacturing of products from raw waste lumber allows to reduce the volume of deforestation and helps to preserve the ecology and economize the material resources.