On the nature of interface of carbon nanotube coated carbon fibers with different polymers

37th Risø International Symposium on Materials Science

Bedi, Harpreet Singh^1 ; Padhee, Srikant S.^1 ; Agnihotri, Prabhat K.^1

Mechanics of Advanced Materials Laboratory, School of Mechanical, Materials and Energy Engineering, Indian Institute of Technology Ropar, Rupnagar, Punjab

140001, India^1

关键词: Chemical vapour deposition;    Experimental investigations;    High-strength fibers;    Interfacial strength;    Multi-scale composites;    Nanoindentation testing;    Reinforcement mechanisms;    Structural applications;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/139/1/012014/pdf
DOI  :  10.1088/1757-899X/139/1/012014

来源: IOP

【 摘 要 】

Experimental investigations are carried out to analyse the wetting behaviour of carbon nanotube (CNT) coated carbon fiber to determine their suitability to process carbon nanotube coated carbon fiber/polymer multiscale composites for structural applications. To overcome the problem of agglomeration, CNTs are grown directly on the surface of carbon fibers as well as fabric using thermal chemical vapour deposition (CVD) technique. The term multiscale is used because different reinforcement mechanisms operate at the scale of long fibers and CNTs which are of few micrometers in length. The load carrying capacity of these multiscale composites critically depends on the efficiency and extent of load transfer from low strength matrix to high strength fiber which in turn depends on the interfacial strength between CNT coated carbon fiber and polymer matrix. A systematic analysis of wetting behaviour of CNT coated carbon fiber with epoxy and polyester matrix is carried out in this study. It is shown that CNT coated carbon fibers as well as fabric show better wettability with epoxy matrix as compared to polyester matrix. This results in stronger interface of CNT coated carbon fiber with epoxy as compared to polyester in multiscale composite system. A similar observation is made in nanoindentation testing of single fiber multiscale composites processed with epoxy and polyester matrix. In addition, it is observed that wettability, interfacial strength and average properties of CNT coated carbon fiber/polymer composites are a function of CNT density on the surface of carbon fibers.