Research of influence of geometrical parameters of a stamp engraving of setting transitions at setting of semi finished pipe products to receiving defect-free products

International Scientific-technical Conference on Innovative Engineering Technologies, Equipment and Materials 2015

工业技术;机械制造;材料科学

Pankratov, D.L.^1 ; Nizamov, R.S.^2 ; Harisov, I Zh^2

Kazan Federal University, Naberezhnye Chelny Institute, Pr. Mira 68/19, Naberezhnye Chelny, Republic of Tatarstan

423812, Russia^1

Forging Plant, Public Joint Stock Company KamAZ, Avtozavodsky Av. 2, Naberezhnye Chelny, Republic of Tatarstan

423827, Russia^2

关键词: Defect-free;    Pipe products;    Semi-finished;    Semi-finished products;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/134/1/012047/pdf
DOI  :  10.1088/1757-899X/134/1/012047

来源: IOP

【 摘 要 】

The cause of a pipe clip during the setting of the pipe is determined on the basis of modeling. The method, which excludes the formation of a defect in a semi finished product by changing the configuration of the setting transition, is developed.