Study on structure and properties of CuZn40Pb alloy

International Conference on Innovative Research - ICIR Euroinvent 2016

Achiei, D.C.^1,3 ; Minciun, M.G.^1,3 ; Vizureanu, P.^1,3 ; Sandu, A.V.^1,3,5 ; Cimpoeu, R.^2 ; Istrate, B.^4

Department Technologies and Equipments for Materials Processing, Gheorghe Asachi Technical University of Iasi, D Mangeron Street, no 41A, Iasi, Romania^1

Department Materials Science, Gheorghe Asachi Technical University of Iai, D Mangeron Street, no 41A, Iasi, Romania^2

Center of Excellence Geopolymer and Green Technology (CEGeoGTech), School of Materials Engineering, Universiti Malaysia Perlis, Kangar, Perlis

01000, Malaysia^3

Department of Mechanical Engineering, Mechatronics and Robotics, Gheorghe Asachi Technical University of Iai, D Mangeron Street, no 41A, Iai, Romania^4

Faculty of Technology, Universitas Ubudiyah Indonesia (UUI), JlnAlue Naga DesaTibang, Banda Aceh, Indonesia^5

关键词: Chemical compositions;    Microstructure analysis;    Optical spectrometers;    Scanning electronic microscopes;    Structure and properties;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/133/1/012015/pdf
DOI  :  10.1088/1757-899X/133/1/012015

来源: IOP

【 摘 要 】

The paper shows aspects about the behavior of Cu-Zn-Pb alloys a subjected to the temperatures variation and corrosion resistance in saline medium (sea water). The chemical composition was determined by spectral analysis on optical spectrometer, type Foundry Masters. The experiments are completed by a microstructure analysis made on scanning electronic microscope.