Analysis of the Face Milling Process Based on the Imitation Modelling

7th International Scientific and Practical Conference on Innovations in Mechanical Engineering

机械制造;材料科学

Khomenko, V.A.^1 ; Cherdancev, A.O.^1 ; Cherdancev, P.O.^1 ; Goncharov, V.D.^1 ; Kulawik, A.^2

Polzunov Altai State Technical University, Lenina 46, Barnaul

656038, Russia^1

Czestochowa University of Technology, Armii Krajowej, Czestochowa

2142-201, Poland^2

关键词: Cutting conditions;    Face milling;    Feed-rates;    Surface finishes;    Surface irregularities;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/126/1/012001/pdf
DOI  :  10.1088/1757-899X/126/1/012001

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

The results of simulation modeling of the face milling process allowed to analyze the surface finish dependence on cutting conditions. It is noted that the surface irregularity in the form of unevenness appears in face milling. Besides, the ratio of feed rate to spindle revolutions speed influences dimensions of surface roughness. The data received are experimentally confirmed.