Surface Layer Formation When Finish-Hardening Processing of the Parts by Smoothing

7th International Scientific and Practical Conference on Innovations in Mechanical Engineering

机械制造;材料科学

Belyaev, V.N.^1,2 ; Ju Tatarkin, E.^3

Biysk Technology Institute, 27 Trofimovast., Biysk

659315, Russia^1

JC At FRPC Altai, 1 Socialisticheskayast., Biysk

659322, Russia^2

I.I. Polzunov Altai State Technical University, 46 Lenina pr., Barnaul

656038, Russia^3

关键词: Copper salt;    Nanocarbons;    Pilot studies;    Surface layers;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/126/1/012005/pdf
DOI  :  10.1088/1757-899X/126/1/012005

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

Problems of surface layer formation of the parts, when hydraulic smoothing, are considered in this work. The results of theoretical and pilot studies of smoothing in case of nanocarbons and copper salts introduction into the process liquid are given. The influence dependences of the processing modes on roughness and microhardness of surface layer are defined.