Analysis Of The Retailoring Methods And The Workability Of Deposited Surfaces

All-Russia Scientific and Practical Conference on Materials Treatment: Current Problems and Solutions

Konovodov, V.V.^1 ; Valentov, A.V.^2 ; Grigoryeva, E.G.^2 ; Abdrasulov, K.A.^2

Novosibirsk State Agrarian University, 147 Nikitin St, Novosibirsk

630039, Russia^1

Yurga Institute of Technology, Affiliate of Tomsk Polytechnic University, 26 Leningradskaya St, Yurga

652050, Russia^2

关键词: Component part;    Mechanical handling;    Processing method;    Repair facilities;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/125/1/012035/pdf
DOI  :  10.1088/1757-899X/125/1/012035

来源: IOP

【 摘 要 】

This work is devoted to the conduction of the analysis of methods and means of retailoring of parts in the conditions of technical repair facilities as well as of the workability of deposited surfaces. The results of the research show that the most important processing methods of reconditioning of component parts severely worn in the course of exploitation are various ways of deposit welding with subsequent mechanical handling. Furthermore, low efficiency of mechanical handling of retailored parts' surfaces is conditioned on their low workability that results from the specific status of weld pad.