On Organizing Quick Change-Over Mass Production

All-Russia Scientific and Practical Conference on Materials Treatment: Current Problems and Solutions

Petrushin, S.I.^1 ; Gubaidulina, R.H.^1 ; Gruby, S.V.^2 ; Nosirsoda, Sh.C.^1

Yurga Institute of Technology, National Research Tomsk Polytechnic University Affiliate, Tomsk, Russia^1

Moscow State Technical University by N.E. Bauman, Moscow, Russia^2

关键词: Cycle time;    Manufacturing facility;    Mass production;    Maximum profits;    New approaches;    Production changes;    Production plans;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/125/1/012011/pdf
DOI  :  10.1088/1757-899X/125/1/012011

来源: IOP

【 摘 要 】

The terms "type of production" and "coefficient of assigning operations" are analyzed. A new method of calculating the optimum production plan based on profit projections is suggested. We recommend using the cycle time values as initial data for designing and developing technology. On the basis of existing techniques used to convert productions we suggest a new approach to production change-over with the service life of manufacturing facilities equal to the time to product's obsolescence. The factors to maximize profits using this change-over method are indicated, with maximum profits being a condition for the organization of quick change-change mass production.