Cutting orientations for non-complex parts in 4th axis machining

2nd International Manufacturing Engineering Conference; 3rd Asia-Pacific Conference on Manufacturing Systems

Zahid, M.N. Osman^1,2 ; Case, K.^2 ; Watts, D.M.^2

Faculty of Manufacturing Engineering, Universiti Malaysia Pahang, Pekan, Pahang

26600, Malaysia^1

Mechanical, Manufacturing and Electrical Engineering, Loughborough University, Loughborough, Leics.

LE11 3TU, United Kingdom^2

关键词: Computer numerically controlled machining;    Cutting orientation;    Finishing operation;    Finishing process;    Machining operations;    Minimizing the number of;    Rapid manufacturing;    Roughing and finishing;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/114/1/012013/pdf
DOI  :  10.1088/1757-899X/114/1/012013

来源: IOP

【 摘 要 】

The application of Computer Numerically Controlled (CNC) machining for Rapid Manufacturing processes (CNC-RM) exploits the innate potential of 4th axis machining. The use of an indexer allows the workpiece to be rotated to various orientations which directly increased the region accessible to the cutting tool. However, in order to avoid thin webs and preserve tool life, cutting must be executed with a minimum of three orientations even for geometrically simple parts. Recent findings have suggested the separation of cutting orientations into roughing and finishing operations. Thus, the selection of orientations in finishing processes becomes more flexible and independent. This study was conducted to identify the effects of using a minimum of two cutting orientations in finishing operations for CNC-RM applications. This method is only applicable for non-complex parts where all the features can be machined from two directions. The results of the study illustrate the positive effects of minimizing the number of orientations. Despite improvement in machining operations, the complexity in defining the cutting orientations was also reduced.