Microplasma technology for carbon micro- and nanostructures formation in gas at atmospheric pressure

8th National Scientific Conference Advances in Electrotechnology (Postepy w Elektrotechnologii)

无线电电子学

Sobczyk, A.T.^1 ; Jaworek, A.^1 ; Klein, M.^1

Institute of Fluid Flow Machinery, Polish Academy of Sciences, Fiszera 14, Gdask, Poland^1

关键词: Carbon feedstock;    Carbon microstructures;    Discharge currents;    Electrical discharges;    Low currents;    Micro and nanostructures;    Micro-plasmas;    Needle electrodes;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/113/1/012006/pdf
DOI  :  10.1088/1757-899X/113/1/012006

来源: IOP

【 摘 要 】

The paper shows the results of investigation of various carbon microstructures deposited on electrodes in low-current electrical-discharges in cyclohexane as carbon feedstock and argon as neutral gas at atmospheric pressure. The plasma was generated between stainless steel needle and plate made of nickel alloy. The carbon micro- and nanostructures have grown at the tip of the needle electrode (anode) for the discharge current ranged from 0.1 mA to 3 mA. The physical properties of carbon fibres were investigated by SEM, EDS and Raman spectroscopy.