Analysis of the possibilities of using dielectric foam in the construction of composite high voltage post-insulators

8th National Scientific Conference Advances in Electrotechnology (Postepy w Elektrotechnologii)

无线电电子学

Mczka, T.^1 ; Paciak, G.^1 ; Jarski, A.^1 ; Pitek, M.^1

Electrotechnical Institute, Division of Electrotechnology and Materials Science, M. Sklodowskiej-Curie 55/61, Wroclaw

50-369, Poland^1

关键词: Composite insulators;    Filling materials;    Foaming technology;    High voltage;    Performance parameters;    Post insulators;    Tubular construction;    Tubular structures;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/113/1/012003/pdf
DOI  :  10.1088/1757-899X/113/1/012003

来源: IOP

【 摘 要 】

This paper presents the construction and basic performance parameters of the innovative tubular construction of high voltage composite insulator filled with the lightweight foamed electroinsulating material. The possibility of using of the commercially available expanding foams for preparing the lightweight foamed dielectric materials was analysed. The expanding foams of silicone RTV and compositions based on epoxy resin and LSR silicone were taken into account. The lightweight foamed dielectric materials were prepared according to the own foaming technology. In this work the experimental results on the use of the selected foams for the preparing of the lightweight filling materials to the tubular structure of composite insulator of 110 kV are presented.