Influence of carbon content on cold rolling and recrystallization texture in polycrystalline 3% Si-Fe

17th International Conference on Textures of Materials

材料科学;物理学

Takenaka, M.^1 ; Shingaki, Y.^1 ; Imamura, T.^1 ; Hayakawa, Y.^1

Steel Research Laboratory, JFE Steel Corporation, Japan^1

关键词: Crystal rotations;    Deformation twin;    Deformed matrix;    Polycrystalline;    Polycrystalline metals;    Recrystallization texture;    Rolling reduction;    Ultra low carbon;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/82/1/012042/pdf
DOI  :  10.1088/1757-899X/82/1/012042

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

The influence of carbon content on cold rolling and recrystallization texture in polycrystalline 3%Si-Fe under the relatively high rolling reduction condition has been investigated. The main component of recrystallization texture was {554} orientation in ultra low carbon (ULC) 3%Si-Fe and {411} orientation in low carbon (LC) 3%Si-Fe. The origin of {411} recrystallization texture development in LC 3%Si-Fe is discussed in terms of the rotation of deformation twin from {100} to {411} orientation with the generation of the slip bands inside the neighboring matrix grain {111}. The rotation axis of this crystal rotation was estimatedaxis. Assuming the single slip system activation in BCC metal, crystal rotation aroundaxis indicates an activation of {110} slip system. In terms of Schmid factor, {112} slip system must be activated in {100} matrix. This is not in agreement with the estimation of {110} slip system activation. Detailed observation on the cold rolled sample revealed that common slip plane passed through the deformation twin and surrounding deformed matrix grains. It is considered that slip plane matching (SPM) with neighboring grains activates the lower Schmid factor slip system in deformation twin. These results suggest that not only Schmid factor but also SPM with neighboring grains should be considered to decide the active slip systems in polycrystalline metals.