The modular design of robotic workcells in a flexible production line

Modern Technologies in Industrial Engineering 2015

Banas, W.^1 ; Sekala, A.^1 ; Gwiazda, A.^1 ; Foit, K.^1 ; Hryniewicz, P.^1 ; Kost, G.^1

Silesian University of Technology, Faculty of Mechanical Engineering, Institute of Engineering Processes Automation and Integrated Manufacturing Systems, ul. Konarskiego 18a, Gliwice

44-100, Poland^1

关键词: Designing process;    Flexible production lines;    Guidance information;    Informatics systems;    Mass production;    Modular designs;    Production system;    Programming process;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/95/1/012099/pdf
DOI  :  10.1088/1757-899X/95/1/012099

来源: IOP

【 摘 要 】

In the case of large-scale and mass production lines often the same model of an industrial robot is used in various places of the line and is intended to various task. However, the replacement of one industrial robot to another is a long lasting and arduous process. It requires stopping all the production line and sometimes even dismantling the whole workcell. Such situations are not frequent in production lines that are not flexible. They are related the most often with the failure on an industrial robot. However, during the designing of a flexible production line the ability to replace any robot, which is unrestricted, fast and trouble-free, greatly increase the flexibility level of such line. It could be realized by modular design of the proposed production line. In this way it could be possible to change any elements of such production system. But this approach needs to apply the specialized informatics system. This paper presents the obtained design of several versions of the same production workcell. Each, succeeding version of the designed production workcell contains more and more modular elements. Thereby it would be presented the evolution of a workcell design beginning from the typical design and ending with the fully modular one. One of tools needed to realize this task is the elaboration of a base of modules and typical joint and mounting elements that could be utilised in the described designing process. It is also presented the guidance information about the designing and programming processes useful at each stage of analysed process..