Research of the pre-launch powered lubrication device of major parts of the engine D-240

6th International Scientific Practical Conference on Innovative Technologies and Economics in Engineering

工业技术;经济学

Korchuganova, M.^1 ; Syrbakov, A.^1 ; Tkachev, A.^1 ; Zorina, T.^1

Yurga Technological Institut Branch, Tomsk Polytechnic University, Russia^1

关键词: Combustion engines;    Contact surface;    Environmental temperature;    Heat accumulator;    Heating devices;    Lubrication devices;    Mobile machines;    Oil circulation;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/91/1/012092/pdf
DOI  :  10.1088/1757-899X/91/1/012092

学科分类：工业工程学

来源: IOP

【 摘 要 】

In the publication, the issues have been considered concerning combustion engine start wear of mobile machines in case of outside storage in the conditions of low environmental temperature. Based on the analysis of existing methods and constructions of powered lubrication devices for contact surfaces of engines, a design of a combined device has been suggested which unites the functions of hydraulic and heat accumulators. On the basis of the elaborated design, preparatory tests have been conducted in order to evaluate the effectiveness of pre-start oil circulation in the engine D-240, as well as the effectiveness rate of thermoinsulation and the heating device of the hydraulic accumulator. The findings of the survey have shown that the pre-start powered lubrication device for major parts of the engine is effective.