Numerical Investigation of Different Radial Inlet Forms for Centrifugal Compressor and Influence of the Deflectors Number by Means of Computational Fluid Dynamics Methods with Computational Model Validation

9th International Conference on Compressors and their Systems

Kozhukhov, Y.V.^1 ; Yun, V.K.^1 ; Reshetnikova, L.V.^1 ; Prokopovich, M.V.^2

Compressor Department, Vacuum and Refrigeration Engineering, Saint- Petersburg Polytechnical University, Saint-Petersburg, Russia^1

Engineer of the Design Department of Special Engineering, Saint-Petersburg, Russia^2

关键词: Circumferential distortions;    Computational fluid dynamics methods;    Computational model;    Computational results;    Numerical calculation;    Numerical experiments;    Numerical investigations;    Static pressure coefficient distribution;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/90/1/012047/pdf
DOI  :  10.1088/1757-899X/90/1/012047

来源: IOP

【 摘 要 】

The goal of this work is numerical experiments for five different types of the centrifugal compressor's inlet chambers with the help of CFD-methods and comparison of the computational results with the results of the real experiment which was held in the Nevskiy Lenin Plant in Saint-Petersburg. In the context of one of the chambers the influence of deflectors on its characteristics was investigated. The objects of investigation are 5 inlet chambers of different types which differ from each other by deflectors' existence and by its number. The comparative analyze of the results of numerical and real experiments was held by means of comparison of relative velocity and static pressure coefficient distribution on hub and shroud region, and also by means of loss coefficient values change for all five chambers. As a result of the numerical calculation the quantitative and qualitative departure of CFD- calculations results and real experiment were found out. The investigation of the influence of the number of deflectors on flow parameters was carried out. The results of the study prove that the presence of the deflectors on flow path significantly increases the probability of the flow separations and reversed flows appearance on them. At the same time, the complete absence of the deflectors in the chamber significantly increases circumferential distortion of the flow; however the loss coefficient decreases anyway, the high values of which are caused by the shock flow existence. Thus, the profiling of the deflectors of the inlet chamber should be given a special attention.