Influence of volumic heat treatments upon cavitation erosion resistance of duplex X2CrNiMoN 22-5-3 stainless steels

International Conference on Applied Sciences 2014

Micu, L.M.^1 ; Bordeasu, I.^1 ; Popoviciu, M.O.^2 ; Popescu, M.^1 ; Bordeau, D.^3 ; Salcianu, L.C.^1

Politehnica University of Timisoara, 2 Piata Victoriei, Timisoara

300006, Romania^1

Academy of Romanian Scientists, 1 Bvd. Mihai Viteazul, Timisoara, Romania^2

Via Universisty College, Horsens, Denmark^3

关键词: Alloyed austenites;    Cavitation erosion resistance;    Erosion resistance;    Ferrite structures;    Martensite stainless steel;    Material science;    Mechanical characteristics;    Post quenching;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/85/1/012019/pdf
DOI  :  10.1088/1757-899X/85/1/012019

来源: IOP

【 摘 要 】

The stainless steels Duplex 2205 with austenite and ferrite structure have mechanical characteristics close to those of martensite stainless steels but a better corrosion resistance; these steels are very sensitive on the heat treatments. Present work studies the cavitation erosion for those steels for three different heat treatments: simply quenched, annealed at 475°C post quenching and annealed at 875°C. The researches were undertaken at Timisoara "Politehnica" University in the Laboratory of Material Science and the Laboratory of Cavitation, using the T2 facility which integrally respects the recommendation of ASTM G32- 10 Standard. The best results were obtained with the specimens annealed at 875°C. In comparison with the stainless steel 41Cr4, with very good cavitation erosion qualities, all tested steels presented also good erosion resistance. So, Duplex 2205 steels can be used for details subjected to cavitation. The best results are obtained by increasing both the hardness and the quantity of the structure constituent with better cavitation erosion resistance, in our case the alloyed austenite.