Statistical analysis on experimental calibration data for flowmeters in pressure pipes

24th A.I.VE.LA. Annual Meeting

Lazzarin, Alessandro^1 ; Orsi, Enrico^1 ; Sanfilippo, Umberto^1

Dipartimento di Ingegneria Civile e Ambientale (DICA), Politecnico di Milano, Piazza Leonardo da Vinci 32, Milan

20133, Italy^1

关键词: Calibration and measurement capabilities;    Calibration tests;    Data set;    Experimental calibration datum;    Flow ranges;    Pressure pipes;    Reference specimens;    Turbine flowmeters;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/882/1/012015/pdf
DOI  :  10.1088/1742-6596/882/1/012015

来源: IOP

【 摘 要 】

This paper shows a statistical analysis on experimental calibration data for flowmeters (i.e.: electromagnetic, ultrasonic, turbine flowmeters) in pressure pipes. The experimental calibration data set consists of the whole archive of the calibration tests carried out on 246 flowmeters from January 2001 to October 2015 at Settore Portate of Laboratorio di Idraulica "G. Fantoli" of Politecnico di Milano, that is accredited as LAT 104 for a flow range between 3 l/s and 80 l/s, with a certified Calibration and Measurement Capability (CMC) - formerly known as Best Measurement Capability (BMC) - equal to 0.2%. The data set is split into three subsets, respectively consisting in: 94 electromagnetic, 83 ultrasonic and 69 turbine flowmeters; each subset is analysed separately from the others, but then a final comparison is carried out. In particular, the main focus of the statistical analysis is the correction C, that is the difference between the flow rate Q measured by the calibration facility (through the accredited procedures and the certified reference specimen) minus the flow rate QMcontemporarily recorded by the flowmeter under calibration, expressed as a percentage of the same QM.