Preparation and characterization of polysulfone/PEG heterogeneous ion exchange membrane for reverse electrodialysis (RED)

International Conference on Energy Sciences 2016

能源学;物理学

Ariono, D.^1 ; Khoiruddin^1 ; Prabandari, D.^1 ; Wulandari, R.^1 ; Wenten, I.G.^1

Department of Chemical Engineering, Institut Teknologi Bandung, Jl. Ganesha 10, Bandung

40132, Indonesia^1

关键词: Cation exchange resins;    Heterogeneous cation exchange membranes;    Heterogeneous ion-exchange membranes;    Hydrophilic membranes;    Ion exchange capacity;    N ,N-Dimethylacetamide;    Reverse electrodialysis;    Solution-casting method;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/877/1/012075/pdf
DOI  :  10.1088/1742-6596/877/1/012075

来源: IOP

【 摘 要 】

Heterogeneous cation-exchange membrane is synthesized using solution casting method. The casting solution is prepared by dispersing finely ground cation-exchange resin particles in N,N-dimethylacetamide (DMAc) solutions of polysulfone (PSf) while polyethylene glycol (PEG400) is used as a modifier. The results show that the PEG400 can increase water uptake, conductivity, and ion-exchange capacity (IEC) of the heterogeneous cation-exchange membrane due to the hydrophilic nature of PEG400. The more hydrophilic membrane results in higher water uptake and wider access for functional sites. However, when the concentration of PEG400 is increased further, the IEC and conductivity tend to decrease. This tendency is more pronounced when the ion-exchange resin particle is increased from 50 to 60%-wt. It could be attributed to the washed out of some ion-exchange particle during membrane immersion due to lower bonding between membrane matrix and the particles.