Optimation Pressure Loss to Oil Production System with Electrical Submersible Pump (ESP) at the Well A SW Field Bojonegoro, East Java

International Conference on Energy Sciences 2016

能源学;物理学

Ilmah, A.M.^1 ; Hendrajaya, L.^1

Physics Departement, Institut Technology Bandung, Indonesia^1

关键词: Diameter variation;    Electrical submersible pumps;    Fluid production;    Inflow performance relationships;    Oil and gas production;    Oil and gas well;    Production wells;    Tubing performance relationships;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/877/1/012069/pdf
DOI  :  10.1088/1742-6596/877/1/012069

来源: IOP

【 摘 要 】

Study about oil and gas well A and SW fields have been conducted in Bojonegoro area, East Java Province. From the research, it is known that one of the constrain in oil and gas production process is a pressure drop, so that is necessary to set Electrical Submersible Pump (ESP) as an artificial lift pump at low pressure wells. It is needed to analyze the production well pressure as an effort to optimize the fluid production. It is in describe to relations between IPR (Inflow Performance Relationship ) curve with TPR (Tubing Performance Relationship), are getting down point cut TPR curve with IPR curve, fluid rate its optimal, so need tubing's diameter variation and the number of stage pump ESP variation to can the most optimal fluid rate. Produced that to tubing variation are 2,441 ID is 876,729 bpd, 2,991 is 961,197 bpd, 3,476 id is 996, 26 Bpd, while on the number of stage pump esp variation The most high is stage 400 with fluid rate 961,197 by comparison stage 338 it has value fluid rate 921,165 bpd, stage 200 it has fluid rate 827,889 bpd, and stage 169 has fluid rate 774,646 bpd. Of some variation tubing and stage pumps that has the most influence to fluid rate optimalize is the change number of stage pump.