Study of Natural Convection Passive Cooling System for Nuclear Reactors

International Conference on Energy Sciences 2016

能源学;物理学

Abdillah, Habibi^1 ; Saputra, Geby^1 ; Novitrian^1 ; Permana, Sidik^1

Physics Department, Institut Teknologi Bandung, Jl. Ganesha No.10, Kota Bandung, Jawa Barat

40132, Indonesia^1

关键词: Convection process;    Cooling material;    Different densities;    Experimental approaches;    Loop configuration;    Passive safety systems;    Temperature differences;    Temperature profiles;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/877/1/012047/pdf
DOI  :  10.1088/1742-6596/877/1/012047

来源: IOP

【 摘 要 】

Fukushima nuclear reactor accident occurred due to the reactor cooling pumps and followed by all emergencies cooling systems could not work. Therefore, the system which has a passive safety system that rely on natural laws such as natural convection passive cooling system. In natural convection, the cooling material can flow due to the different density of the material due to the temperature difference. To analyze such investigation, a simple apparatus was set up and explains the study of natural convection in a vertical closed-loop system. It was set up that, in the closed loop, there is a heater at the bottom which is representing heat source system from the reactor core and cooler at the top which is showing the cooling system performance in room temperature to make a temperature difference for convection process. The study aims to find some loop configurations and some natural convection performances that can produce an optimum flow of cooling process. The study was done and focused on experimental approach and simulation. The obtained results are showing and analyzing in temperature profile data and the speed of coolant flow at some point on the closed-loop system.