Neutronics and thermal hydraulic analysis of TRIGA Mark II reactor using MCNPX and COOLOD-N2 computer code

International Nuclear Science and Technology Conference 2016

Tiyapun, K.^1 ; Wetchagarun, S.^1

Reactor Center, Thailand Institute of Nuclear Technology, 16 Vibhavadi Rangsit St., Bangkok

10900, Thailand^1

关键词: Abnormal conditions;    Core configuration;    Departure from nucleate boiling;    Nuclear parameters;    Power distributions;    Thermal hydraulic modeling;    Thermal hydraulics;    Thermal-hydraulic analysis;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/860/1/012035/pdf
DOI  :  10.1088/1742-6596/860/1/012035

来源: IOP

【 摘 要 】

The neutronic analysis of TRIGA Mark II reactor has been performed. A detailed model of the reactor core was conducted including standard fuel elements, fuel follower control rods, and irradiation devices. As the approach to safety nuclear design are based on determining the criticality (keff), reactivity worth, reactivity excess, hot rod power factor and power peaking of the reactor, the MCNPX code had been used to calculate the nuclear parameters for different core configuration designs. The thermal-hydraulic model has been developed using COOLOD-N2 for steady state, using the nuclear parameters and power distribution results from MCNPX calculation. The objective of the thermal-hydraulic model is to determine the thermal safety margin and to ensure that the fuel integrity is maintained during steady state as well as during abnormal condition at full power. The hot channel fuel centerline temperature, fuel surface temperature, cladding surface temperature, the departure from nucleate boiling (DNB) and DNB ratio were determined. The good agreement between experimental data and simulation concerning reactor criticality proves the reliability of the methodology of analysis from neutronic and thermal hydraulic perspective.