Scale Control and Quality Management of Printed Image Parameters

Mechanical Science and Technology Update

力学;物理学

Novoselskaya, O.A.^1 ; Kolesnikov, V.L.^1 ; Solov'Eva, T.V.^1 ; Nagornova, I.V.^2 ; Babluyk, E.B.^2 ; Trapeznikova, O.V.^3

Belarusian State Technological University, 13a, Sverdlova st., Minsk

220006, Belarus^1

Moscow Polytechnic University, Bolshaya Semenovskaya str., 38, Moscow

107023, Russia^2

Omsk State Technical University, Mira ave., 11, Omsk

644050, Russia^3

关键词: Management and controls;    Normalized parameters;    Offset paper;    Paper surface;    Print contrast;    Print uniformity;    Printed images;    Scale control;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/858/1/012022/pdf
DOI  :  10.1088/1742-6596/858/1/012022

学科分类：力学，机械学

来源: IOP

【 摘 要 】

The article provides a comparison of the main valuation techniques for a regulated parameter of printability of the offset paper by current standards GOST 24356 and ISO 3783: 2006. The results of development and implementation of a complex test scale for management and control the quality of printed production are represented. The estimation scale is introduced. It includes normalized parameters of print optical density, print uniformity, picking out speed, the value of dot gain, print contrast with the added criteria of minimizing microtexts, a paper slip, resolution threshold and effusing ability of paper surface. The results of analysis allow directionally form surface properties of the substrate to facilitate achieving the required quality of the printed image parameters, i. e. optical density of a print at a predetermined level not less than 1.3, the print uniformity with minimal deviation of dot gain about the order of 10 per cents.