Geometrical product specifications. Datums and coordinate systems

Mechanical Science and Technology Update

力学;物理学

Glukhov, V.I.^1 ; Ivleva, I.A.^1 ; Zlatkina, O.Y.^1

Omsk State Technical University, Mira ave., 11, Omsk

644050, Russia^1

关键词: Angular coordinates;    Co-ordinate system;    Geometrical product specification;    Natural transition;    Quality indicators;    Rectangular coordinates;    Technical products;    Workpiece coordinate systems;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/858/1/012013/pdf
DOI  :  10.1088/1742-6596/858/1/012013

学科分类：力学，机械学

来源: IOP

【 摘 要 】

The work is devoted to the relevant topic such as the technical products quality improvement due to the geometrical specifications accuracy. The research purpose is to ensure the quality indicators on the basis of the systematic approach to the values normalization and geometrical specifications accuracy in the workpiece coordinate systems in the process of design. To achieve the goal two tasks are completed such as the datum features classification according to the number of linear and angular freedom degrees constraints, called the datums informativeness, and the rectangular coordinate systems identification, materialized by workpiece datums sets. The datum features informativeness characterizes the datums functional purpose to limit product workpiece linear and angular degrees of freedom. The datum features informativeness numerically coincides with the kinematic pairs classes and couplings in mechanics. The datum features informativeness identifies the coordinate system without the location redundancy. Each coordinate plane of a rectangular coordinate system has different informativeness 3 + 2 + 1. Each coordinate axis also has different informativeness 4+2+Θ (zero). It is possible to establish the associated workpiece position with three linear and three angular coordinates relative to two axes with the informativeness 4 and 2. is higher, the more informativeness of the coordinate axis or a coordinate plane is, the higher is the linear and angular coordinates accuracy, the coordinate being plotted along the coordinate axis or plane. The systematic approach to the geometrical products specifications positioning in coordinate systems is the scientific basis for a natural transition to the functional dimensions of features position - coordinating dimensions and the size of the features form - feature dimensions of two measures: linear and angular ones. The products technical quality improving is possible due to the coordinate systems introduction materialized by datums sets in GPS standards and national standards. Standards on the datums and datums systems should cover all the geometrical specifications and all the processes of the products life cycle: designing, manufacturing, verification and exploitation.