Wake Flow Simulation of a Vertical Axis Wind Turbine Under the Influence of Wind Shear

Wake Conference 2017

Mendoza, Victor^1 ; Goude, Anders^1

Department of Engineering Sciences, Division of Electricity, Uppsala University, Uppsala 21, Sweden^1

关键词: Different terrains;    Experimental activities;    Governing equations;    Inflow velocity;    Numerical results;    Turbulence intensity;    Vertical axis wind turbines;    Wind energy industry;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/854/1/012031/pdf
DOI  :  10.1088/1742-6596/854/1/012031

来源: IOP

【 摘 要 】

The current trend of the wind energy industry aims for large scale turbines installed in wind farms. This brings a renewed interest in vertical axis wind turbines (VAWTs) since they have several advantages over the traditional Horizontal Axis Wind Tubines (HAWTs) for mitigating the new challenges. However, operating VAWTs are characterized by complex aerodynamics phenomena, presenting considerable challenges for modeling tools. An accurate and reliable simulation tool for predicting the interaction between the obtained wake of an operating VAWT and the flow in atmospheric open sites is fundamental for optimizing the design and location of wind energy facility projects. The present work studies the wake produced by a VAWT and how it is affected by the surface roughness of the terrain, without considering the effects of the ambient turbulence intensity. This study was carried out using an actuator line model (ALM), and it was implemented using the open-source CFD library OpenFOAM to solve the governing equations and to compute the resulting flow fields. An operational H-shaped VAWT model was tested, for which experimental activity has been performed at an open site north of Uppsala-Sweden. Different terrains with similar inflow velocities have been evaluated. Simulated velocity and vorticity of representative sections have been analyzed. Numerical results were validated using normal forces measurements, showing reasonable agreement.