Air Pollutants Minimalization of Pollutant Absorber with Condensation System

5th International Conference on Theoretical and Applied Physics 2015

Ruhiat, Yayat^1 ; Wibowo, Firmanul Catur^1 ; Oktarisa, Yuvita^1

Dept. of Physics Education, Faculty of Teacher Trainings and Education, University of Sultan, Ageng Tirtayasa, Indonesia^1

关键词: Atmospheric stability;    Condensation process;    Condensing systems;    Design for production;    Industrial area;    Industrial development;    Particle separation;    Pollutant emission;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/846/1/012014/pdf
DOI  :  10.1088/1742-6596/846/1/012014

来源: IOP

【 摘 要 】

Industrial development has implications for pollution, one of it is air pollution. The amount of air pollutants emitted from industrial depend on several factors which are capacity of its fuel, high chimneys and atmospheric stability. To minimize pollutants emitted from industries is created a tool called Pollutant Absorber (PA) with a condensing system. Research & Development with the approach of Design for Production was used as methodology in making PA. To test the function of PA, the simulation had been done by using the data on industrial emissions Cilegon industrial area. The simulation results in 15 years period showed that the PA was able to minimize the pollutant emissions of SO2 by 38% NOx by 37% and dust by 64%. Differences in the absorption of pollutants shows the weakness of particle separation process in the separator. This condition happen because the condensation process is less optimal during the absorption and separation in the separator.