A Two-step Approach for Damage Identification in Axially Functionally Graded Beams

12th International Conference on Damage Assessment of Structures

Lu, Z.R.^1 ; Yao, R.Z.^1 ; Liu, J.K.^1 ; Huang, M.^1

Department of Applied Mechanics, Sun Yat-sen University, Guangdong Province, Guangzhou

510006, China^1

关键词: Acceleration response;    Damage Identification;    Functionally graded;    Functionally graded beams;    Response sensitivity analysis;    Stiffness parameters;    Structural damage identification;    Two stage approach;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/842/1/012082/pdf
DOI  :  10.1088/1742-6596/842/1/012082

来源: IOP

【 摘 要 】

This study presents a two-stage approach based on residual force vector and response sensitivity analysis for structural damage identification in axially functionally graded (AFG) beams. The local damage is simulated by a reduction in the elemental Young's modulus of the beam. The residual force vector is used to find the suspicious damaged elements in the beam at first. Then, a hybrid objective function is established and a sensitivity-based model updating method is adopted to identify the perturbation of the stiffness parameter from the measured acceleration responses. Two numerical examples are investigated to illustrate the correctness and efficiency of the proposed method. The effects of measurement noise on the identification results are investigated. Studies in this paper indicate that the proposed method is efficient and robust for identifying damages in the axially functionally graded beams. The advantage of the present approach lies in that only a few number of acceleration measurements and the first several natural frequencies of the beam are needed in the identification.