The dynamic sublayers for improving the adhesion of CVD diamond films on copper

5th International Congress on Energy Fluxes and Radiation Effects 2016

Gaydaychuk, A.V.^1 ; Linnik, S.A.^1 ; Okhotnikov, V.V.^1

National Research Tomsk Polytechnic University, 30 Lenin Avenue, Tomsk

634050, Russia^1

关键词: Al based composite;    Composite interlayers;    Copper substrates;    CVD Diamond films;    Indentation test;    Interface characteristic;    Plasma assisted chemical vapor deposition;    Polycrystalline diamond films;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/830/1/012102/pdf
DOI  :  10.1088/1742-6596/830/1/012102

来源: IOP

【 摘 要 】

Polycrystalline diamond films were fabricated on copper substrates by a multi-step process comprised of physical vapor deposition of Al-based composite interlayer on Cu substrate and depositing continuous diamond film on composite interlayer by plasma assisted chemical vapor deposition (PACVD). The interface characteristics and adhesion strength were investigated by Auger electron spectroscopy, Raman analysis, calotest and indentation test. The results show that the continuous film without cracks is successfully obtained. The improved adhesion between diamond film and substrate results from the low residual stress in the film due to their compensation by Al interlayer in the sample cooling process.