Research of influence of mobile cathodic stains of the vacuum arc for reception of the adjustable roughness of metal surfaces

5th International Congress on Energy Fluxes and Radiation Effects 2016

Anikeev, V.N.^1 ; Dokukin, M. Yu^1

Bauman State Technical University, 2-nd Baumanskaya 5, Moscow

105005, Russia^1

关键词: Adhesive properties;    Experimental devices;    Heat exchanging coefficient;    Medical implants;    Metal surfaces;    Operational characteristics;    Vacuum arc discharges;    Vacuum chambers;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/830/1/012075/pdf
DOI  :  10.1088/1742-6596/830/1/012075

来源: IOP

【 摘 要 】

In the modern technics there is a requirement in micro- and macrorough surfaces of products for improvement of their operational characteristics (improvement of adhesive properties of various coverings, decrease in deterioration of rubbing details because of the best deduction of greasing, increase of the heat exchanging coefficient from a surface, stimulation of adhesive processes on sites of contact to a bone fabric of medical implants in stomatology and orthopedy etc.). In the given work the modes of reception regulated micro- and macrorough surfaces on samples from a titanic alloy and stainless steel by electrothermal influence of moving cathodic stains in the vacuum arc discharge are investigated. Chaotically moving stains, possessing high specific power allocation (∼ 107W/cm2), "scan" the difficult design of a product, including "shadow" sites, doing rough its blanket. The sizes of roughnesses are regulated by a current and time of influence of the discharge, pressure in the vacuum chamber and a number of other parameters. The scheme of experimental device, photo and the characteristic of rough surfaces and technological modes of their reception are resulted.