Engineering design and integration of in-vessel single turn segmental coil in vacuum vessel of SST-1

10th Asia Plasma and Fusion Association Conference

Jayswal, Snehal^1 ; Chauhan, P.^1 ; Santra, P.^1 ; Vasava, K.^1 ; Perekh, T.^1 ; Patel, H.^1 ; Biswas, P.^1 ; Pradhan, S.^1

Institute for Plasma Research, Bhat, Gandhinagar, Gujarat State, India^1

关键词: Copper conductors;    Design drivers;    Engineering design;    Localized errors;    Material selection;    Quality assurance/control;    Toroidal Field coils;    Vacuum vessel;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/823/1/012069/pdf
DOI  :  10.1088/1742-6596/823/1/012069

来源: IOP

【 摘 要 】

SST-1 tokamak is having the error field due to unsymmetrical positioning of Toroidal field coils which push the plasma to inner side from its major radius of 1100 mm. hence it is required to install the In-vessel Coil (PF6) at a location of 1350 mm radius and elevation of 350 mm above and below the mid plane of the toroidal field coils. The In-Vessel coil was decided to make in eight segments for futuristic use, to control the individual localized error field correction by supplying the different current. A single turn, eight segments, copper conductor with 18 mm diameter with GFRP insulation and in housed in SS304 L casing to carry 8000 A current for 10 s was designed and installed in vacuum vessel of SST-1. This paper will present the design drivers, material selection, advantages and constraints of the in-vessel coils, its conceptual and engineering design, CAD models, finite element analysis using ANSYS, its fabrication, quality assurance/control and assembly/integration aspects inside vacuum vessel of SST-1.